View SC9696P_4488267.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SC9696P
CD SERVO CONTROLLER WITH MCU
DESCRIPTIONS
SC9696P is a CD play controller with CD player, remote control decoding, clock display mature function , which includes CD digital servo controller, CD signal processor, digital audio DAC output, with interface supporting wma/mps encoding/decoding circuit, TunePLL circuit SC9257, electronic volume control circuit, LCD drive circuit SC2124 and compatible with TAPE and AUX IN.
FEATURES
LQFP-80-10x10-0.4
* CD play Compatible with CD/CD-R/CD-RW Support CD play/pulse Support CD Pre/Next Support CD FF/FB Support single music playback/catalog circle play & display Support CD random access & display Support browse play Support CD sync tape recording * Receiving Support bands select in four areas (USA, GEN 1/2, JAPAN) Support manually channel tuning forward/backward Support automatically channel tuning forward/backward Support channel preset (FM: 20, AM/MW:10) * Taping Support TAPE display * AUX Support AUX input * Electronic volume control Support CD/receiving/tape/AUX voice channel electronic switching Support volume adjust & display Support voice mode FLAT, POP, CLASS, ROCK, JAZZ5 preset Support mute switch control & display Support X-BASS switch control & f\display Support ENCODER-VOLUME control * Clock Support Clock display & adjust Support alarm, alarm turn on/off Support sleep mode
ORDERING INFORMATION
Device Package Seal SC9696P
SC9696P LQFP-80-10x10-0.4
APPLICATIONS
* Desktop audio system
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 1 of 21
SC9696P
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATING (Tamb=25C)
Characteristics Supply Voltage Input Voltage on Pins Operating Temperature Symbol VDD VIN Topr Rating -0.5 ~ +5.5 -0.5 ~VDD + 0.5 -20 ~ +75 Unit V V C
ELECTRICAL CHARACTERISTICSVDD=4.5~5.5V; VSS=0V; Tamb=-10~+50C
Characteristics MCU Operating Voltage Operating Voltage Operating Current RFIN Input Signal Reference Voltage Photoelectricity Signal Bias Input Input Current Of Central Diode B Input Current Of Central Diode A Symbol MVDD VDD IDD VRFIN VIr Vcom IDB IDA Exception MCU 5V(CD operating) Test condition Min. 4.0 4.5 0 0 Typ. 5.0 5.0 50 1 0.5VDD 2.5 Max. 5.5 5.5 9 9 V A A Unit V V mA V
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 2 of 21
SC9696P
Characteristics Input Current Of Central Diode C Input Current Of Central Diode D Input Current Of Satellite Diode F Input Current Of Satellite Diode E Low-level Output Current at PA Port. High-level Output Current at PA Port. Low-level Output Current at PB Port. High-level Output Current at PB Port. Low-level Output Current at PC Port. High-level Output Current at PC Port. Low-level Output Current at PG Port. High-level Output Current at PG Port. Low-level Output Current at PH Port. High-level Output Current at PH Port. LDON Low-level Output Current Load Resistance DAC Full-Scale DAC Output Voltage RAD Output Current FOC Output Current SLED Current MOTO Output Current Symbol IDC IDD IRF IRE IOL(A) IOH(A) IOL(B) IOH(B) IOL(C) IOH(C) IOL(G) IOH(G) IOL(H) IOH(H) ILDON RL VFS IRAD IFOC ISLED IMOTO Left channel is the same as the right. Left channel is the same as the right. High level is the same as the low level. High level is the same as the low level. High level is the same as the low level. High level is the same as the low level. Test condition Min. 0 0 0 0 0 5 0.9 0 0 0 0 Typ. 10 5 10 5 10 5 10 5 10 5 1.1 1 1 1 5 Max. 9 9 4.5 4.5 2 1.2 10 Unit A A uA A mA mA mA mA mA mA mA mA mA mA mA K V mA mA mA mA
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 3 of 21
SC9696P
Characteristics Low Level Output Driving Voltage High Level Output Driving Voltage Moto Low Level Output Voltage Moto High Level Output Voltage Driving Current of high impedance DAC Total Harmonic Distortion DAC output Signal to Noise Symbol Test condition Min. 0 VDD-0.4 0 VDD-1 RAD, FOC, SELD, MOTO 0dB 1Khz Signal Input No signal input 0 to 19 KHz 19 to 20 KHz 24KHz DA Filter Attenuation Filter_DA 25 to 35 KHz 35 to 64 KHz 64 to 68 KHz 68KHz 69 to 88KHz OSC Frequency Fsystem -10 1 25 40 50 31 35 40 Typ. 0 -65 90 16.9344 Max. 0.4 VDD 1.0 VDD +10 100 0.001 2 Unit V V V V A dB dB dB dB dB dB dB dB dB dB MHz
VOLDRIVE1 RAD, FOC, SELD VOHDRIVE1 VOLmoto VOHmoto IZODRIVE THD S/N RAD, FOC, SELD
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 4 of 21
SC9696P
PIN CONFIGURATIONS
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61 60 OV_RAM 59 WCLKIN 58 SCLKIN 57 SDATAIN 56 WCLKOUT 55 SCLKOUT 54 SDATAOUT 53 SBSY 52 GND
PG.3 1 PG.2 2 PG.1 3 PG.0 4 MGND 5 MVDD 6 BUZZ/PB.7 7 INT6/PB.6 8 INT5/PB.5 9 EXTREF/PA.7 10 AD6/PA.6 11 AD5/PA.5 12 AD4/PA.4 13 AD3/PA.3 14 AD2/PA.2 15 AD1/PA.1 16 AD0/PA.0 17 MVDD 18 MXI 19 MXO 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
SC9696P
51 VDD 50 MOTO 49 SLED 48 FOC 47 RAD 46 Sysclk 45 VOL 44 FILTCL 43 FILTCR 42 VOR 41 VREF
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 5 of 21
SC9696P
PIN DESCRIPTIONS
Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Pin name PG.3 PG.2 PG.1 PG.0 MGND MVDD BUZZ/PB.7 INT6/PB.6 INT5/PB.5 EXTREF/PA.7 AD6/PA.6 AD5/PA.5 AD4/PA.4 AD3/PA.3 AD2/PA.2 AD1/PA.1 AD0/PA.0 MVDD MXI MXO MGND INT4/PB.4 INT3/PB.3 I/O I/O I/O I/O I/O I I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I O I I/O I/O output pull-up close General purpose IO port, input bit by bit control with pull-up, output pull-up close General purpose IO port, input bit by bit control with pull-up, output pull-up close General purpose IO port, open-drain input bit by bit control with pull-up, output forced to pull-up MCU and periphery ground MCU and periphery power supply General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port Also used as AD reference voltage input General purpose IO port Also used as AD switch channel 6 General purpose IO port Also used as AD switch channel 5 General purpose IO port Also used as AD switch channel 4 General purpose IO port Also used as AD switch channel 3 General purpose IO port Also used as AD switch channel 2 General purpose IO port Also used as AD switch channel 1 General purpose IO port Also used as AD switch channel 0 MCU and periphery power supply 75K oscillator input port 75K oscillator output port MCU and periphery ground General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input REV:1.1 2009.02.26 Page 6 of 21 Descriptions General purpose IO port, input bit by bit control with pull-up,
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
SC9696P
Pin no. 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Pin name INT2/PB.2 INT1/PB.1 INT0/PB.0 RXD/PC.7 TXD/PC.6 PC.5 PC.4 PC.3 PC.2 PC.1 PC.0 MRST MTEST VPP PH.7 VDDO VSSO VREF VOR FILTCR FILTCL VOL Sysclk RAD FOC SLED MOTO VDD GND SBSY SDATAOUT I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I I/O I I O O O O O I O O O O I I O O Descriptions General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close, Schmitt input General purpose IO port, input bit by bit control with pull-up, output pull-up close and also used as serial data receiving. General purpose IO port, input bit by bit control with pull-up, output pull-up close and also used as serial data transmitting. General purpose IO port, input bit by bit control with pull-up, output pull-up close General purpose IO port, input bit by bit control with pull-up, output pull-up close General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up General purpose IO port, open-drain, input bit by bit control with pull-up, output forced to pull-up MCU reset MCU test port, connected to ground when normal working OTP high voltage download Common IO port without pull-up or pull-down resistor DAC analog power supply DAC analog ground DAC reference voltage output DAC right channel output DAC right channel filter capacitor. DAC left channel filter capacitor. DAC left channel output DAC system clock input Tracking drive output Focus drive output Sled drive output Spindle drive output Core digital voltage Core digital ground Sub code sync output signal Audio data output
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 7 of 21
SC9696P
Pin no. 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 Pin name SCLKOUT WCLKOUT SDATAIN SCLKIN WCLKIN OV_RAM V2/SLED_SW LDON CL16 VSSA1 VDDA1 B A C D F E VCOM Idata RFIN RFREF VSSA2 VDDA2 CRIN CROUT PG.4 I/O O O I I I O I O O I I I I I I I I I O I O I I I O I/O Data bit clock output Data word clock output Audio data input Data bit clock input Data word clock input Internal SRAM overflow signal Sledge motor position monitor signal input Laser control signal output 16M clock output Ground Power supply Central diode current signal input 1 Central diode current signal input 2 Central diode current signal input 3 Central diode current signal input 4 Satellite diode current signal input 1 Satellite diode current signal input 2 Photoelectricity Signal Bias Input Data Slice feed-back current output Reference Signal. Reference Signal reference voltage/level adjustment reference current output Ground Power supply 8M oscillator input 8M oscillator output General purpose IO port, input bit by bit control with pull-up, output pull-up close Descriptions
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 8 of 21
SC9696P
FUNCTION DESCRIPTIONS
1.
LCD
SC2124 is adopted for LCD drive circuit. LCD with 4COMx32SEG, 3V, 1/4duty and 1/3 bias is adopted, as shown below: Truth table: COM0 SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 4F 4A 4K REPEAT 5F 5A 5K STEREO 6F 6A 6K TIMER 7F 7A 7K 8F 8A 8K MUTE 1F 1A 1K CD 2F 2A 2K MP3 3F 3A 3K COM1 1H 1J 1M 1B 2H 2J 2M 2B 3H 3J 3M 3B 4H 4J 4M 4B 5H 5J 5M 5B 6H 6J 6M 6B 7H 7J 7M 7B 8H 8J 8M 8B COM2 1G 1P 1N 1C 2G 2P 2N 2C 3G 3P 3N 3C 4G 4P 4N 4C 5G 5P 5N 5C 6G 6P 6N 6C 7G 7P 7N 7C 8G 8P 8N 8C 4E FOLDER 4D ALL 5E MEMORY 5D RANDOM 6E SLEEP 6D TAPE 7E AUX 7D INTRO 8E .MHZ 8D KHZ 1D \ 2E USB 2D WMA 3E ID3 3D COM3 1E
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 9 of 21
SC9696P
2. Jumper A/D Value 0.00~0.63V 0.63~1.25V 1.25~1.88V 1.88~2.50V 2.50~3.12V 3.12~3.75V 3.75~4.38V 4.38~5.00V 3. Keyboard SONY SONY THOMSON THOMSON SANYO SANYO SAMSUNG SAMSUNG Pickup Mechanism KSS-213C KSS-213C TCP-11TK TCP-11TK DA11 DA11 V75 V75 Clock & Timer Enable Disable Enable Disable Enable Disable Disable Enable
3.1 Panel keyboard arrangement KEY0 POWER OPCL VOL UP VOL DN FOLDER_UP(PRESET_UP) FOLDER_DN(PRESET_DN) 3.2 Remote keyboard arrangement T0 K0 K1 K2 K3 K4 K5 K6 K7 INTRO TIMER VOL UP VOL DN POWER FUN_MODE T1 MUTE STOP/BAND NEXT_FF PLAY PREV_FW MEMORY RANDOM RPT ID3 SLEEP FOLDER_UP(PRESET_UP) FOLDER_DN(PRESET_DN) REC/COPY T2 OPCL FUN_CDUSBSD EQ/ X-BASS T3 KEY1 STOP/BAND PLAY NEXT_FF PREV_FW REC/COPY RPT MEMORY INTRO RANDOM MUTE EQ/ X-BASS TIMER KEY2 FUN_CDUSBSD FUN_MODE KEY3 SLEEP ID3
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 10 of 21
SC9696P
4.
Receiving interface mode
4.1 Receiving band & area Interface for connecting SC9257 (SC72131) 9257_PERIOD/9257_CLOCK/9257_DATA AREA CODE BAND FM MW FM AM FM GEN2 10 MW LW JAPAN 11 FM AM FREQUENCY RANCE[Hz] 87.50- 108.00M 522-1620K 76.0-90.0M,TV1-3 522-1629K 87.50-108.00M 522-1620K 144-281K 87.5-108.0M 520-1710K STEP[Hz] 50K 9K 100K,1CH 9K 50K 9K 1K 100K 10K FREQ REF[Hz] 50K/3.125K 9K 25K 9K 50K/3.15K 9K 1K 50K/3.125K 10K IF +10.7M/1.3375M +450K -10.7M +450K +10.7M/1.3375M +450K +10.7M/1.3375M +450K
USA GEN1
00 01
4.2 Keys description
1) Enter TUNER mode Press POWER to turn on and press FUN_MODE to enter TUNER mode 2) STOP/BAND Switch band: FM AM FM 3) PREV_REW Press for a short time for manually channel tuning backward Press for longer time for automatically channel tuning backward and stop after tuning. 4) NEXT_FF Press for a short time for manually channel tuning forward Press for longer time for automatically channel tuning forward and stop after tuning. 5) PRESET_UP/PRESET_DN Select preset channel or channel number (cyclic up/down) 6) MEMORY Press MEMORY for a long time to enter channel setting mode for preset channels
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 11 of 21
SC9696P
5.
Receiving display 1) FM BAND
2) AM BAND
3) Display of select preset channel
4) Display after 0.5s
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 12 of 21
SC9696P
5) Display of channel memory
6.
Tape mode 6.1 Key description 1) Enter TAPE mode Press POWER to turn on and press FUN_MODE to enter TUNER mode. 2) Display
7.
CD mode
7.1 Key description 1) Enter CD PLAYER mode Press POWER to turn on and press FUN_MODE to enter CD/USB/SD mode, then press FUN_CDUSBSD to enter CD PLAYER mode. 2) PLAY/PAUSE Play/pause key 3) STOP Stop key
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 13 of 21
SC9696P
4) RANDOM Random access (PREV_REW is invalid in this mode) 5) PREV_REW Press for a short time for previous music and for the last music if the current music is the first one. Press for a long time for fast backward and release for stop, and for normal play if it comes to the beginning. 6) NEXT_FF Press for a short time for next music and for the first music if the current music is the last one. Press for a long time for fast forward and release for stop, and for normal play if it comes to the last. 7) REPEAT
8) MEMORY Enter edit mode (valid in STOP mode) Press REW/FF to select music and press MEMORY to save and up to 20 music can be stored. Then press PLAY to play and it will exit this mode if there is no operation in 10s, with music reversed. Press STOP to clear music and exit this mode. 9) INTRO Browse play switch (10s before play) 7.2 CD display 1) Display number of music and total time in STOP mode
2) Display in PLAY mode
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 14 of 21
SC9696P
3) Display in PAUSE mode
Glinting for 0.5s
SD
4) Display in REW/FF mode
5) Display in RANDOM mode
6) Display in REPEAT ONE
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 15 of 21
SC9696P
7) Display in REPEAT ALL
8) Display in PROGRAMMING DISPLAY mode
9) Display in PROGRAMMING mode
8.
Volume mode
8.1 Key description 1) VOLUME+/Increase/decrease volume 2) MUTE Mute on/off
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 16 of 21
SC9696P
3) EQ Preset voice mode switch FLAT JAZZ CLASSIC POP ROCK FLAT
8.2 Volume and sound effect display
8.3 JAZZ sound effect selected by EQ
9.
Others 9.1 Key description 1) CLOCK Press MEMORY (CLOCK ADJ) for a long time in standby mode to enter time setting mode and press UP/DOWN to adjust. 2) SLEEP Press SLEEP to enter the mode and SLEEP glints, press it again for time setting (10~90 min) and SLEEP normally displays. Press it third time to cancel. 3) TIMER Timing turn on (alarm) Press TIMER to enter timing mode and press MEMORY for a long time for time setting and adjust time trough NEXT_FF/PREC_REW 4) POWER Standby and turn on.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 17 of 21
SC9696P
9.2 Display 1) Standby
2) SLEEP
3) TIMER
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 18 of 21
SC9696P
TYPICAL APPLICATION DIAGRAM
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
2009.02.26 Page 19 of 21
SC9696P
PACKAGE OUTLINE
LQFP-80-10x10-0.4
12.000.25 10.000.25 1.60MAX 0.150.05 0.050.20
UNIT: mm
10.000.25 80
12.000.25
MOS DEVICES OPERATE NOTES:
Electrostatic charges may exist in many things. Please take following preventive measures to prevent effectively the MOS electric circuit as a result of the damage which is caused by discharge: The operator must put on wrist strap which should be earthed to against electrostatic. Equipment cases should be earthed. All tools used during assembly, including soldering tools and solder baths, must be earthed. MOS devices should be packed in antistatic/conductive containers for transportation.
Disclaimer: * Silan reserves the right to make changes to the information herein for the improvement of the design and performance without further notice! * All semiconductor products malfunction or fail with some probability under special conditions. When using Silan products in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards strictly and take essential measures to avoid situations in which a malfunction or failure of such Silan products could cause loss of body injury or damage to property. * Silan will supply the best possible product for customers!
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.1
0.600.15
1
0.25 0.40TYP 0.140.25
2009.02.26 Page 20 of 21

▲Up To Search▲

Price & Availability of SC9696P

	To Download SC9696P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .